Country of Origin: Germany Solid welding machine for heating element-butt welding of PE and PP pipes and fittings from OD 200 up to OD 500, max. force 1414 daN at 100 bar, max. working pressure appr. 130 bar, SDR values according to the hydraulic unit. Basic machine with separating device for the heating element, double clamping equipment, guided by two hydraulic cylinders, two connection hoses firmly fixed at the machine, with two quick-action couplings. The lefthand clamping device can be easily removed by loosening 3 screws for welding at difficultly accessible places (in trenches, at branches of T-pieces etc.). Hydraulic unit with protective frame, for clamping device operation and precise welding pressure control, with pressure relief valve (reproducible value), digital pressure gauge, pressure backup and two quick-action coupling devices for connection to the clamping device. Planer with electric chain drive in a closed aluminium housing and external chip removal, on/off switch at the geared motor. Heating element, working diameter 540 mm, nonstick-coated, with connection cable and plug with earthing contact, control lamps for system- and interval checking, electronic temperature control in accordance with DVS 2208 and digital temperature display for comparison of desired and actual value. Heat protected box for the heating element and the planer. Transport case (134x130x125 cm). Smaller pipe dimensions can be clamped by means of reducer inserts depending on the pipe diameter as well as IPS. Data: Voltage: 400 Volt (+/- 10%) Power: hydraulic unit 560 Watt, planer 1100 Watt, heating element 5800 Watt Frequency: 50 Hz + to reduce the diameter (1 set = 8 halfshells) for OD 200, 225, 250, 280, 315, 355, 400 and 450 transport case (151 x 59 x 33 cm)
