Solid welding machine for heating element-butt welding of PE and PP pipes and fittings from OD 200 up to OD 450, max. force 1414 daN at 100 bar, max. working pressure appr. 120 bar, SDR values according to the hydraulic unit. Basic machine with separating device for the heating element, double clamping equipment, guided by two hydraulic cylinders, two connection hoses firmly fixed at the machine, with two quick-action couplings. The lefthand clamping device can be easily removed by loosening 3 screws for welding at difficult accessible places (in trenches, at branches of T-pieces etc.). Hydraulic unit with protective frame, for clamping device operation and precise welding pressure control, with pressure relief valve (reproducible value), digital pressure gauge, pressure backup and two quick-action coupling devices for connection to the clamping device. planer with electric chain drive in a closed aluminium housing and external chip removal. Heating element, working diameter 470 mm, nonstick-coated, with connection cable and plug with earthing contact, on/off switch, control lamps for system- and interval checking, electronic temperature control in accordance with DVS 2208. Heat protected box for the heating element and the planer. Transport case (134x130x125 cm) Smaller pipe dimensions can be clamped by means of reducer inserts depending on the pipe diameter as well as IPS. Data: Voltage: 230V (+/- 10%) Power: hydraulic unit 560 Watt, planer 1750 Watt, heating element 3500 Watt Frequency: 50 Hz
