Extruder, Munsch, MAK40B is delivered with support legs, preheating screen, tool set, 3 different air nozzles
and 1 piece of unprocessed welding shoe no. 43.01XXX-40-40-M and 1 pc. welding shoe no. 43.0114K-40-40-M (Ex. Powerbox)
Drive motor and fan motor are both brushless, which means you do not have to change carbon brushes, and provides long life.
| Technical data |
| |
MAK40B
with its own air blower |
|
| Output with Ø 5 PE welding wire |
3,9 kg/h |
|
| Output with Ø 4 PE welding wire |
2,5 kg/h |
|
| Materials |
PE / PP / PVDF |
|
| Welding Wire |
Ø4 – Ø5 mm. |
|
| Scope |
8 – 30 mm. |
|
| 360º swivel head |
Optional. Item no Ko5541 |
|
| Hot Air Blower – Brushless |
2300 W. |
|
| Air heater |
– |
|
| Countdown preheat |
Digital |
|
| Heater by screw |
650 W. |
|
| Motor control and supply |
Brushless,
connect the Power box |
|
| Cold Start Protection |
And |
|
| Electronic speed |
And |
|
| Length |
570 mm. |
|
| Weight |
8 kg. |
|
| Power supply |
230 V. – 6 m. cable with plug. |
|
| Item no. |
531.010 |
|
| 45º angle possible ( accessories ) |
No |
|
| 90º angle possible ( accessories ) |
No |
|
| Extension Cable Powerbox ( accessories ) |
Optional. Item no. K03749 |
|
The extruder has built computer 4 Controls.
Button 1 = ENTER. Button 2 = CHANGE. Button 3 and 4 = Arrow keys up and down.
On start-up it asks: Choose material. With the arrow keys you can choose between program PP – PE -PVDF or up to 4 custom applications. Then press ENTER.
Then the computer prompts : Select welding wire thickness. With the arrow keys you can choose between 4mm and 5mm. welding wire. Then press ENTER.
Then find the computer itself the preset program. A countdown timer shows you when the extruder is hot enough to be used.
If you want to change the temperature of the air or the screw , use the arrow keys. Finish with ENTER.
Output adjusted using the knob in the pistol grip. Maximum output is set to power- box.
After use typed: SHIFT – extruder cools down and can be switched off after about. 1 minutes.
