Extruder, Munsch, MAK36B is delivered with support legs, preheating screen, tool set, 4 different air nozzles and 1 piece of unprocessed welding shoe no. 43.01XXX-40-40-M and 1 pc. welding shoe No. 43.0114K-40-40-M.
| Technical data |
| |
MAK36B
with its own air blower |
|
| Output |
2,0 kg/h to 3,6 kg/h |
|
| Materials |
PE / PP / PVDF |
|
| Welding Wire |
Ø4 – Ø5 mm. |
|
| Scope |
8 – 30 mm. |
|
| 360º swivel head (Optional) |
Item no. K05541 |
|
| Hot Air Blower – Brushless |
2300 W. |
|
| Air heater |
– |
|
| Countdown preheat |
Digital |
|
| Heater by screw |
650 W. |
|
| Motor |
Standard |
|
| Cold Start Protection |
And |
|
| Electronic speed |
And |
|
| Length |
570 mm. |
|
| Weight |
9,2 kg. |
|
| Power supply |
230 V. – 6 m. cable with plug. |
|
| Item no. |
531.009 |
|
| 45º angle possible ( accessories ) |
Item no. K05655 |
|
| 90º angle possible ( accessories ) |
Item no. K06013 |
|
The extruder has built computer 4 Controls.
Button 1 = ENTER. Button 2 = CHANGE. Button 3 and 4 = Arrow keys up and down.
On start-up it asks: Choose material. With the arrow keys you can choose between program PP – PE -PVDF or up to 4 custom applications. Then press ENTER.
Then the computer prompts : Select welding wire thickness. With the arrow keys you can choose between 4mm and 5mm. welding wire. Then press ENTER.
Then find the computer itself the preset program. A countdown timer shows you when the extruder is hot enough to be used.
If you want to change the temperature of the air or the screw , use the arrow keys. Finish with ENTER.
After use typed: SHIFT – extruder cools down and can be switched off after about. 1 minutes.
