Fresacryl MC 80 Diamond edge polishing machine

Fresacryl MC 80 Diamond edge polishing machine

€ 23.933,33


Edge polishing machine for acrylic (PMMA)


"Fresacryl" is a polishing machine on which a diamond cutter with three cutting edges is mounted, suitable for mirror polishing of cut edges or rough thermoplastic plates.

The workpieces can be placed on the machine in gaskets or individually with a thickness of 3 to 60 mm.

The length of the workpieces is almost unlimited, but it is advisable in the case of machining workpieces with large dimensions, the use of special supports to adapt to the machine.

The feed of the workpiece on the machine is performed by pulling the workpiece between two vertical rotating belts, at a speed that can be varied from 0.50 to 2 m / min.

In relation to the material to be processed, it is desirable to identify the most suitable feed rate.

For example: For a good polishing of methacrylate sheets, the ideal speed is 0.70-1 m / min.

"Fresacryl" is very quiet (max. 80dB noise).

The cutter is adjusted for average removal speeds of approx. 0.5 mm.

Grinding of the cutter is carried out on average every 4,000 meters of work around, and should be carried out in our workshop.

Chip removal is done through a pipe that can be connected to a suction filter with an output of 1500 mc / h through a pipe diameter of 70 mm.

 

.

FRESACRYL MC 80

Workable thickness

3 - 60 mm

Mill diametre mod 3tp/d

80 mm

Advance speed

0,50 - 2 mt/min

Motor power 220/380 V. trif

1,5 hp

Aie pressure

6 atm

Lenght x widtk

900 x 1000 mm

Workinh table height

850 mm

Approx weight

350


Model/Product no.: 558.020
Stock status: Ask For delivery time



pc

Pictures may be optional