Extruder, HSK 60 DE 400V with own air supply. Weight 11.4 kg. Output PE 6 kg / h

+45 9835 1930 --or-- SEND MAIL

Temperature control within approx. ± 1 °. Top instrument = electronic setting of air temperature, on the green numbers with the arrow keys up and down. The red numbers show the current temperature. Temperature sensor is located directly in the hot air stream. Bottom instrument = electronic temperature setting on worm. The green numbers are set with the up and down arrow keys. The red numbers show the current temperature. Temperature sensor is placed directly in the hot melt. Air OFF / ON = The heat on the fan can be switched off without changing the temperature setting. Temperature settings do not change when the extruder is turned off. Welding wire ø 3 mm 5 mm Production quantity 6 kg/h (with 5 mm PEHD welding wire) Heating capacity extruder 1200 W / Air: 3000 W Drive power 2000 W Plate thickness 15 50 mm weight 11.4 kg voltage 3 x 230 V/50 Hz (*60hz)

Model/Product no.: 532.024

Stock status: Ask For delivery time

for extrusion welding of PEHD, PP, PVDF and PVC*
Control of the mass temperature by measuring directly in the melt
Wire retraction without additional conveying aids
Actual and setpoint display of mass and air temperature
Cold Start Protection
3, 4, 5 mm welding wire can be used
including 1 piece of welding shoe blank

*PVC with separate auger

HS	85158090/DE

Title	Type	Size	Download
bruger60de.pdf	PDF	2.07MB	Download