Extruder, HSK 60 DE 400V with own air supply. Weight 11.4 kg. Output PE 6 kg / h
  • Extruder, HSK 60 DE 400V with own air supply. Weight 11.4 kg. Output PE 6 kg / h
  • Extruder, HSK 60 DE 400V with own air supply. Weight 11.4 kg. Output PE 6 kg / h
  • Extruder, HSK 60 DE 400V with own air supply. Weight 11.4 kg. Output PE 6 kg / h

Extruder, HSK 60 DE 400V with own air supply. Weight 11.4 kg. Output PE 6 kg / h

+45 9835 1930 --or-- SEND MAIL

Temperature control within approx. ± 1 °.

Top instrument = electronic setting of air temperature, on the green numbers with the arrow keys up and down. The red numbers show the current temperature. Temperature sensor is located directly in the hot air stream.

Bottom instrument = electronic temperature setting on worm. The green numbers are set with the up and down arrow keys. The red numbers show the current temperature. Temperature sensor is placed directly in the hot melt.

Air OFF / ON = The heat on the fan can be switched off without changing the temperature setting.

Temperature settings do not change when the extruder is turned off.

 

 
HSK60 DE. Extruder with its own air blower.

Output

 6 kg/h with 5 mm.  PEHD wire

Materials

 PEHD / PP / PVDF  

Engine

 2000 W 

Welding wire

  3 - 4 og 5 mm.

Field of application

 15 - 50 mm.  

Weight

 11,4 kg.  

Length

  mm.  

Cold start protection

 Yes

Electronic speed control

 Yes 

Heating element by screw

 1200 W

Hot air blower

 3000 W   

Connection

 3x230 V. 50 Hz         
Model/Product no.: 532.024
Stock status: Ask For delivery time



  • for extrusion welding of PEHD, PP, PVDF and PVC*
  • Control of the mass temperature by measuring directly in the melt
  • Wire retraction without additional conveying aids
  • Actual and setpoint display of mass and air temperature
  • Cold Start Protection
  • 3, 4, 5 mm welding wire can be used
  • including 1 piece of welding shoe blank

*PVC with separate auger

Title Type Size Download
bruger60de.pdf PDF 2.07MB Download

Related products