Extruder, HSK 40 RSX. with own air supply. Weight 8.5 kg. Output PE 4 kg / h

Extruder, HSK 40 RSX. with own air supply. Weight 8.5 kg. Output PE 4 kg / h

Temperature control within approx. ± 1 °.

Top instrument = electronic setting of air temperature, on the green numbers with the arrow keys up and down. The red numbers show the current temperature. Temperature sensor is located directly in the hot air stream.

Bottom instrument = electronic temperature setting on worm. The green numbers are set with the up and down arrow keys. The red numbers show the current temperature. Temperature sensor is placed directly in the hot melt.

Air OFF / ON = The heat on the fan can be switched off without changing the temperature setting.

Temperature settings do not change when the extruder is turned off.

  HSK40 RSX.  Extruder  with its own air blower

Output

3,8 kg/h with 5 mm.  PEHD welding wire

Materials

PEHD / PP / PVDF  

Engine

1150 W 

Welding wire

 3mm , 4mm and 5 mm.

Field of application

15 - 50 mm.  

Weight

8,8 kg.  

Length

650 mm.  

Cold start protection

Yes

Electronic speed control

Yes

Heating element by screw

700 W

Hot air blower

2200 W   

Connection

230 V. 50 Hz          

Model/Product no.: 532.016
Stock status: Ask For delivery time




  • for extrusion welding of PEHD, PP, PVC and PVDF*
  • Control of the mass temperature by measuring directly in the melt
  • Wire feeding, no additional conveying aids required
  • Actual and setpoint display of mass and air temperature
  • Cold Start Protection
  • 3, 4, 5 mm welding wire can be used
  • including 1 piece of welding shoe blank

*PVDF with separate auger

Title Type Size Download
bruger40rsx.pdf PDF 1.40MB Download