Extruder, Munsch MAK58B, comes with support legs, preheating screen, tool set, 4 different air nozzles and
1 pc. unprocessed welding shoe no. 43.01XXX-40-40-M and 1 pc. welding shoe no. 43.0121K-60-50-M
| Technical data |
| |
MAK58B
with its own air blower |
|
| Output |
3,8 kg/h to 5,8 kg/h |
|
| Materials |
PE / PP / PVDF |
|
| Welding Wire |
Ø4 – Ø5 mm. |
|
| Scope |
12 – 40 mm. |
|
| 360º swivel head (Optional) |
Item no. K05543 |
|
| Hot Air Blower – Brushless |
2300 W. |
|
| Air heater |
– |
|
| Countdown preheat |
Digital |
|
| Heater by screw |
800 W. |
|
| Motor |
Standard |
|
| Cold Start Protection |
And |
|
| Electronic speed |
And |
|
| Length |
700 mm. |
|
| Weight |
10,2 kg. |
|
| Power supply |
230 V. or 400 V |
|
| Optional accessories |
|
|
| Item no. |
531.015 |
|
| 360º swivel head (Optional) |
531.034 |
|
| 45º angle possible |
|
|
| 90º angle possible |
|
|
The extruder has built computer 4 Controls.
Button 1 = ENTER. Button 2 = CHANGE. Button 3 and 4 = Arrow keys up and down.
On start-up it asks: Choose material. With the arrow keys you can choose between program PP – PE -PVDF or up to 4 custom applications. Then press ENTER.
Then the computer prompts : Select welding wire thickness. With the arrow keys you can choose between 4mm and 5mm. welding wire. Then press ENTER.
Then find the computer itself the preset program. A countdown timer shows you when the extruder is hot enough to be used.
If you want to change the temperature of the air or the screw , use the arrow keys. Finish with ENTER.
After use typed: SHIFT – extruder cools down and can be switched off after about. 1 minutes.
.
