360° swivel head. Digital control of temperatures and engine speed.
The extruder is fitted with side handles, which can be displaced in the longitudinal direction, and angled up and down.
Extruders in Series 25 B come with tripod with preheat shield and 1 piece. blank welding shoe No. 42.01XXX-40-30-M and 1 piece. welding shoe No. 42.0107K-40-30M
7,5 m. cable between the extruder and power box.
Drive motor are brushless, which means you do not have to change the carbon brush and provide long life.
| Technical data |
| |
|
MEK25B
External air supply |
| Output |
|
0,7 kg/h to 2,5 kg/h |
| Materials |
|
PE / PP / PVDF |
| Welding Wire |
|
Ø3 – Ø4 mm. |
| Scope |
|
4 – 15 mm. |
| 360º integrated swivel head |
|
And |
| Hot Air Blower – Brushless |
|
– |
| Air heater |
|
2300 W. |
| Countdown preheat |
|
Digital |
| Heater by screw |
|
400 W. |
| Motor control and supply |
|
Brushless,
connect the Power box |
| Cold Start Protection |
|
And |
| Electronic speed |
|
And |
| Length |
|
470 mm. |
| Weight |
|
5 kg. |
| Power supply |
|
230 V. – 6 m. cable with plug. |
| Item no. |
|
531.020 |
| 45º angle possible ( accessories ) |
|
Item no K04122 |
| 90º angle possible ( accessories ) |
|
Item no K04123 |
| Extension Cable Powerbox ( accessories ) |
|
Item no. K03749 |
The extruder has built computer 4 Operating keys.
Button 1 = ENTER. Button 2 = CHANGE. Button 3 and 4 = Arrow keys up and down.
On start-up it asks: Choose material. With the arrow keys you can choose between program PP – PE -PVDF or up to 4 custom applications. Then press ENTER.
Then the computer prompts : Select welding wire thickness. With the arrow keys you can choose between Ø 3 and 4 mm. welding wire. Then press ENTER.
After your computer detects even the pre-set program. A countdown timer shows you when the extruder is hot enough to be used.
If you want to change the temperature of the air or the screw , use arrow keys. Finish with ENTER.
Output adjusted using the knob in the pistol grip. Maximum output is set to power- box.
After use typed: SHIFT – extruder cools down and can be switched off after about. 1 minutes.
