Piegacryl 2000 (machine with 2 heating units)

Piegacryl 2000 (machine with 2 heating units)

€ 15.146,67


Piegacryl is intended for heating thermoplastic sheets, and is particularly suitable for bending extremely thick sheets, up to 15-18 mm. Contactless heating takes place, using quartz tubes. Each heating unit consists of a quartz tube with two plate-supporting sections in the sides that should be cooled by water circulation. Adjustment of the opening on the water-cooled sections can be set symmetrically from 0 to 60 mm to create an even heating zone on the workpiece. Start and heat adjustment (0-800 °) are independent of each unit. The upper unit can be detached and placed parallel to the lower unit.
 
Operation.
Place the plates to be bent, set the heating time on the timer, start the cycle by pressing a push button or pedal (descending the upper heating unit and piece locking with automatic release at the end of the cycle), take the piece out and let it cool in a template to achieve the required bending angle.
 

TECHNICAL FEATURES:

Electric power supply 220 V \380 v trif.
Pneumatic feed 5 Atm
Heated zone width 0-80 mm
Max, bending thickness 15 mm
Bendable length 2050 mm
Resistance power 1300 Watt/m(approx)
Water supply, with or without recycling (CILLER)
Emne positioning square with metric rule
EEC Safety Standards, Photoelectric cell.


Model/Product no.: 558.102
Stock status: Ask For delivery time



pc

Pictures may be optional