RVL 1616 Pipe-laying wagon.80 km/h Payload 1400 kg. Total weight 2500 kg. DEKRA documents follow trailer.

with a large mounted basket for pipe coils with a maximum pipe diameter of 180 mm and a weight of up to 1400kg. Length of pipe coil at max. diameter = 200 m. This trailer is equipped with a single axle chassis, straight drawbar with ball type clutch and overflow brake. The (un)loading of the pipe coils can be done with an excavator or other lift possibilities. The transport and loading basket for PVC pipe coils is mounted on the trailer. The pipe coils are loaded from behind or above with a crane or an excavator. The basket has a “gate� at the back for the load pipe also coils at the back. After separating the connecting belts, the pipe coils will be laid on two carrier rollers and four guide rollers. Additional rollers to secure the coil are not required. RVL 1616 is galvanized and will be delivered with TÜV. Our advantages of the uncoiling curve: - Multiple support points for pipe coil for carrying and guide rollers - Unloads coil from above at rear rollers in the back - Thereby better to move out of the pipe coil with pressure - Inner touching is attached to the basket by a belt and hand winch Tube Extensor A pipe stretcher is mounted on the rear crossbar, which can be adjusted on the pipe diameter – max. diameter 180 mm. Technical data: Length: approx. 4,935 mm Width: approx. 2,300 mm Height (unloaded): approx. 2,945 mm Payload at 80 km/h: 1400 kg Dead weight: 900 kg Adm. Total weight: 2500 kg Axle single axe Drawbar straight with overrun brake and Max. Tube Coil Diameter: 3,750 mm Max. Width of pipe coil: 1,500 mm