Temperature control within approx. ± 1 °.
Top instrument = electronic setting of air temperature, on the green numbers with the arrow keys up and down. The red numbers show the current temperature. Temperature sensor is located directly in the hot air stream.
Bottom instrument = electronic temperature setting on worm. The green numbers are set with the up and down arrow keys. The red numbers show the current temperature. Temperature sensor is placed directly in the hot melt.
Air OFF / ON = The heat on the fan can be switched off without changing the temperature setting.
Temperature settings do not change when the extruder is turned off.
| |
HSK60.1 DE Granulat. Extruder with its own air blower |
|
Output
|
6 kg/h with 3 mm. PEHD granulate |
|
Materials
|
PEHD / PP / PVC |
|
Engine
|
2000 W |
|
Granulate
|
Approx. grain size 3 mm.
|
|
Field of application
|
15 - 50 mm. |
|
Weight
|
16 kg. |
|
Length
|
770 mm. |
|
Cold start protection
|
Yes |
|
Electronic speed control
|
Yes |
|
Heating element by screw
|
1000 W |
|
Hot air blower
|
3000 W |
|
Connection
|
3x230 V. 50Hz |
